Tefal FV2040E0 Manuel d'instructions télécharger pdf (Page 11)

PROBLEM CAUSES SOLUTIONS

Water drips from

the holes in the

soleplate.

The chosen temperature is too

low and does not allow for the

formation of steam.

You are using steam while the iron

is not hot enough.

You are using the Shot of Steam

button too often.

There is too much steam.

You have stored the iron

horizontally, without emptying it

and without setting it to .

Position the thermostat in the steam range

(from •• to MAX).

Wait until the thermostat light goes out.

Wait a few seconds between each use of

the button.

Reduce the steam.

Always store your iron on its heel.

Brown streaks

come through the

holes in the

soleplate and

stain the linen.

You are using chemical descaling

agents.

You are not using the right type of

water.

Fabric fibres have accumulated in

the holes of the soleplate and are

burning.

Your linen has not been rinsed

sufficiently or you have ironed a

new garment before washing it.

Do not add any descaling agents to the

water in the water tank.

Perform a self-cleaning operation and

consult the section "What water to use?".

Perform the self-cleaning operation and

clean the soleplate with a damp sponge.

Vacuum the holes of the soleplate from

time to time.

Make sure that your laundry is rinsed

sufficiently so as to remove any deposits of

soap or chemical products on new

clothes.

The soleplate is

dirty or brown

and can stain the

linen.

Your are ironing with an

inappropriate setting

(temperature too high).

Clean the soleplate as indicated above.

Select the appropriate setting.

There is little or no

steam.

The water tank is empty.

The anti-calc valve is dirty.

Your iron has a build-up of scale.

Your iron has been used dry for

too long.

Fill it.

Clean the anti-calc valve.

Clean the anti-calc valve and carry out a

self-clean.

Carry out a self-clean.

The soleplate is

scratched or

damaged.

You have placed your iron flat on

a metallic rest-plate or ironed

over a zip.

Always set your iron on its heel.

If there is a problem

Environment protection first !

If you have any problem or queries, please contact our Customer Relations team first for expert help

and advice:

0845 602 1454 - UK \ (01) 4751947 - Ireland or consult our website - www.tefal.co.uk

Your appliance contains valuable materials which can be recovered or recycled.



Leave it at a local civic waste collection point.

Steam or water

comes out from

the iron as you

finish filling the

tank.

The spray does

not spray.

The steam control is not set to .

The water tank is overfilled.

There is not enough water in the

water tank.

Check that the steam control is set to .

Never overfill the water tank. Empty out

the excess.

Fill up the water tank.

NOT FV2040 027877 22/03/07 11:13 Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Tefal FV2040E0 Manuel d'instructions Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Tefal FV2040E0